Weekly Testing

WARNING!

  • It is important to test this unit every week to make sure it is working properly. Using the test button is the recommended way to test this Smoke/CO Alarm.

  • NEVER use an open flame of any kind to test this unit. You might accidentally damage or set fire to the unit or to your home. The built-in test switch accurately tests the unit’s operation as required by Underwriters Laboratories, Inc. (UL). NEVER use vehicle exhaust! Exhaust may cause permanent damage and voids your warranty.

  • If the Alarm ever fails to test properly, replace it immediately. Products under warranty may be returned to the manufacturer for replacement. See "LIMITED WARRANTY".

Video: Test and Silence your BRK Alarm

Learn how to properly test and temporarily silence your smoke or carbon monoxide alarm.

To test this alarm press and release the Test/Silence button. The alarm will chirp. To exit test mode repeat these steps.

During testing, you will see and hear the following sequence:

  • The Horn will sound 3 beeps, pause, 3 beeps. The Alarm LED flashes Red in sync with the horn pattern.

  • Next the Horn will sound 4 beeps, pause, 4 beeps. The Alarm LED flashes Red in sync with the horn pattern.

If the unit does not alarm, make sure the batteries are correctly installed, and test again. If the unit still does not alarm, replace it immediately.